Example : To obtain the creation of several plans while following a curved skeleton in order to obtain the intersection of these plans with the entities selected to cross. The result will be a 2D sketch per created plan or a single 3D sketch grouping all entities (sections).

Here one wishes to create 11 intersections along the spline selected according to a step of 10 mm.

By clicking on the icon , one reverses the side of the curve for the creation of the plans.


 


The got result in only one step, it is creation:

  • Of a curve 3D allowing creations of the plans.
  • Of the 11 plans requested.
  • Of the 11 sketches 2D asked.


 


It is possible to click on the icon , that makes it possible to create the maximum of plans distributed uniformly along the curve.

Here one creates plans according to an interval of 10 mm. The number of plans calculated is displayed (grayed).

By clicking on the icon , one reverses the side of the curve for the creation of the plans.

To note that the distribution is not equidistant (to notice the position of the last plan compared to the end of the curved skeleton).


 


The got result in only one step, it is creation:

  • Of a curve 3D allowing creations of the plans.
  • Of the 15 calculated plans.
  • From 1 3D sketch asked comprising the sections.


 


It is possible to check the option ''Equidistant distribution of the plans''. In this case one specifies the number of plans to be divided along the curve.

Here one wishes to create 10 plans distributed along the selected spline. The step is calculated and displayed (grayed).

By clicking on the icon , one reverses the side of the curve for the creation of the plans.


 


The result got in only one step, it is creation:

  • Of a curve 3D allowing creations of the plans.
  • Of the 10 calculated plans.
  • Of the 10 sketches 2D asked comprising the sections.