Example 1 : To obtain, in only one step, the creation of several plans per repetition in order to obtain the intersection of these plans with the entities selected to cross (here voluminal bodies). The required result will be one 2D sketch by plan created.

By clicking on the icon , the direction of the repetition is reversed.


 


The result got in only one step :

15 plans were created and 16 sketches 2D were created as required, the plan of right-hand side existing already in the part.


 


Example 2 : To obtain and create, in only one step, several plans and several 2D sketch or only one 3D sketch starting from a selected plan.

Here creation of 3 plans starting from the ''plane face'' in order to obtain 4 2D sketch generated by the intersection of these plans with surfaces to cross.

By clicking on the icon , the direction of the repetition is reversed.


 


The got result, in only one step, it is creation:

  • Of the 3 plans per repetition.
  • From 1 sketch on the selected face.
  • Of 3 sketches on the 3 levels created.


 


Example 3 :

If the option  is checked, one generates the mirror plans in order to obtain the corresponding sections.


 


The got result, in only one step, it is creation:

  • Repeated plans (3) then symmetrized (3) compared to Plan7 selected and according to the step of 10mm.
  • Only one 3D sketch asked containing them 6 sections.