This part can be activated or not . This item should be deactivated if you wish to copy only the sheet format(s) of the reference drawing document.

If this item is activated then it is possible to assign sheet formats according to the formats of the documents to be modified. There are three types of formats:

  • Standard formats These are the standard Windows formats. You select by the icon the desired sheet format. The formats are defined in the window ''.Format customization''.
  • Customized formats Definition of three specific formats. You can select by the icon the desired sheet format, for example a particular sheet format for a document with particular dimensions. These formats are defined in ''Format customization''.
  • Format customization All formats can be set by clicking on .


 


In this window, you specify the widths and heights as well as the orientation to be taken into account for each of the formats. Modify the numerical values directly in the cells.

The unit of the expressed values can be chosen between Millimeters or Inches.


 


A tolerance between the specified values and the values found in the formats of the documents to be modified can be given.

For example :

If the dimensions of the sheet format of the document to be modified are 1187x840 millimetres, with a the tool CopyOptions will use the '' sheet format mapA0'' (1189x841).


The character ''*The '' key at the bottom of the left column is not valid. If formats are added with this key, they will not be taken into account.