Example 1 : Get, in one stepThe first step is the creation of several planes by repetition in order to obtain the intersection of these planes with the selected entities to be cut (here the volumic body). The requested result will be a 2D sketch for each created plane.

By clicking on the icon The direction of repetition is reversed.


 


The result obtained in one step :

15 plans were created and 16 2D sketches were created as requested, the right-hand plan already existing in the part.


 


Example 2 : Obtain and create, in one stepYou can choose between several planes and several 2D sketches or a single 3D sketch from a selected plane.

Here creation of 3 plans from the ''flat side'' in order to obtain 4 2D sketches generated by the intersection of these planes with the surfaces to be cut.

By clicking on the icon The direction of repetition is reversed.


 


The result obtained, in one stepis creation:

  • Of the 3 shots per repetition.
  • 1 sketch on the selected side.
  • 3 sketches out of the 3 plans created.


 


Example 3 :

If the is checked, the mirror planes are generated to obtain the corresponding sections.


 


The result obtained, in one stepis creation:

  • Repeated planes (3) then symmetrical (3) in relation to the Plan7 selected and following the 10mm.
  • Only one 3D sketch requested containing the 6 sections.