These choices are possible with the 2 selection methods ''.3D mode'' and ''Projected mode''.

The points or vertices belong to the 3D model or to a sketch of the 3D model. The coordinates are extracted XYZ in ''.3D mode'' and YY in ''Projected mode''.


 


All types can be checked or unchecked in a single action with the exception of which cannot be activated with or .

Clicking on this icon deletes all the lines generated in the table as well as the associated markers and any points created. The numbering restarts at the beginning value (just after the line ''Origin'').

Clicking on this icon cancels the last selection. The table line and the associated marker are deleted. The numbering restarts at the previous value.


  • Points/Summits selection :

The points or vertices belong to the 3D model or to a sketch of the 3D model. The XYZ coordinates are extracted.

The types of extraction are as follows:

This icon allows to extract the coordinates of any vertex resulting from the intersection of 2 3D edges or .

This icon allows you to extract the coordinates of all the sketch points.

This icon allows you to extract the coordinates of 3D reference points (Reference geometry / Point).

It is possible to select reference points created in the 3D model. To do this, the points must be selected from the FeatureManager via the tabs. Selection is not possible in the drawing view.


 


This icon allows to extract the coordinates of the 3D centers of mass (Reference geometry / Center of mass). The selection can be made in the drawing view.


  • Selection of circle, arc, ellipse and portion of ellipse :

Entities are edges or sketch entities of the 3D model. The coordinates Xc,Yc,Zc of the center are extracted.

We extract the coordinates X1,Y1,Z1 and X2,Y2,Z2 (3D mode) or X1, Y1 and X2, Y2 (projected mode) of the 2 end points for the arcs and partial ellipses.

The value R of the radius (or D of the diameter) is extracted for arcs and circles.

This icon allows to extract the coordinates of the sketch circles or circular edges. To be combined with the options.

This icon allows to extract the coordinates of the arcs of circle of sketch or the circular edges. To be combined with the options.

This icon allows to extract the coordinates of the sketch ellipses.

This icon allows to extract the coordinates of the partial ellipses of the sketch.

This icon allows to extract the coordinates of the intersection point generated by the tangent lines of a circular arc or a circular edge. this icon cannot be combined with and .