In the '' modeSelection of points or verticesThe following filters can be used:

  • Summit of 3D geometries and 2D and 3D sketch entities.
  • 3D or 2D sketch point, circle center point.
  • Reference point.
  • Center of mass.
  • Circle center of 2D or 3D sketch and 3D geometry.
  • Arc center of 2D or 3D sketch and 3D geometry.
  • Ellipse center of 2D or 3D sketch and 3D geometry.
  • Arc center of 2D or 3D sketch ellipses and 3D geometry.
  • Intersection of the 2 tangents of a 2D or 3D sketch arc and 3D geometry, so this filter cannot be combined with the following filters.
    1. Arc center of 2D or 3D sketch and 3D geometry
    2. Arc center of 2D or 3D sketch ellipses and 3D geometry
  • Disable all filters.
  • Activate all filters.


Example of selections:

Selecting a circle center point

This selection contains the X,Y,Z coordinates of the selected point.


 

Selecting a circle center

This selection contains the X,Y,Z coordinates of the center point of the circle as well as the radius or diameter information (See Extraction options).

By default, the annotation points to the circle, it is possible to point to the center of the circle by checking the option before making the selection.

 

Selection of a circular arc with the tangent intersection filter

This selection contains the X,Y,Z coordinates of the point of intersection of the tangents of an arc.

If theis checked, the intersection of the tangents is thus sketched, and the annotation points to the point of intersection.