This part allows you to modify the tolerances of the dimensions already toleranced in relation to a surface treatment.


  • Operations on the quotation :


 


The '' frameOperation on the quotation'' allows you to define the maximum and minimum values of the treatment, this value is expressed in micron. These values will be added or subtracted to the tolerances of the dimensions selected in the box ''.Selections''.

It is possible to modify only one value, maximum or minimum. It is sufficient to set the value that should not be changed to ''.0''.


 


  • Selections : 


- Selection of the set of dimensions whose tolerances should be increased by twice the value of the treatment.


 


- Selection of the set of dimensions whose tolerances will have to be reduced by twice the value of the treatment.


 


- Selection of the set of dimensions whose tolerances should be increased by one time the value of the treatment.


 


- Selection of the set of dimensions whose tolerances should be reduced by one time the value of the treatment.


 


It is possible to deselect all the dimensions with the button  .


  • Example :


 

   


A color is assigned to each dimension of the drawing according to the set to which they belong.

To start the modification, click on Validate.


 


It is possible to return to the initial values of the dimensions by clicking on the button  .