Before starting to use it, it is necessary to set the options.

 

When these options are filled in and validated the type of drilling is indicated in the name of the function in the creation tree (only interesting if the drilling takes into account the type of material). In the previous example the value displayed will be AC-> S0.90 AC H2.93 #0.

This option allows you to enter, in the function name, the depth of the hole if it is blind.

The name of the function is associative, any change in depth will modify it. It is therefore not recommended to activate this option if equations concerning it are added.

This option allows to automatically number the holes with a prefix (configurable) and an incremental number whose starting value can be fixed.

When an existing sketch with points is selected, once all the holes have been automatically created, the original sketch can be deleted or the links to it can be kept. In this case, the modification should not be made on the function but on the original sketch.

These 2 options cannot be checked simultaneously.

This option allows you to define how the holes are created (one function per hole or one function per face).

  You can specify the directory in which the standards files are stored. In "txt" format, they are fully editable, allowing values to be added, modified or deleted.

You may have several standards files. In this case, there will be a drop-down menu to select the one you want to use.

IMPORTANT: giving names makes it easier to recognize them in the construction tree and they can be retrieved in the scoreboard.