The standard ISO 13715 allows to define 6 possibilities to indicate the tolerances of the edges. So it is possible to enter a numerical value in the 6 value entry fields.

The deviation from the ideal nominal shape can be defined by specifying a size.

If it is necessary to specify upper and lower limit deviations for the edge size, both values must be specified. The upper limit deviation is placed above the lower limit deviation (see Examples). The limit deviations indicated correspond to the maximum and minimum dimensions respectively.


  • All fields are optional.


    


  • Each field allows you to enter a decimal or integer value.
  • The value can be preceded by a + or a - sign.

 

See the examples of use.