This section allows you to add sheet metal folder properties and to manage the position of these properties in the views created (below or in the center of unfolded views) for laser cutting.

The name of the part can also be displayed between the view and the properties, useful for example for parts with only one volume body.


"Manage properties" - Click on this button to add properties. This will also add a column.

By selecting a property it is possible to change the display order of the properties on the drawing views, to do this use the arrows "UP" "DOWN".

This order will also be retrieved for export in CSV format.


 


5 columns are displayed by default and cannot be deleted.

Click on "Add"You can add one of the information provided by SOLIDWORKS. It is possible to add one of the information provided by SOLIDWORKS or to enter a property present in "the article of the welded parts".


  -->


The name of the column header can be changed by double-clicking on the label.


 


The width of the column can be adjusted by double-clicking on the value.


 


In any case, it will always be possible to modify this width dynamically (in the Windows way).


 


It is possible to change the order of the columns by selecting the property and clicking on the arrows "UP" "DOWN". In this example the "Material" column will be in the last position.


 


Here is an example of the result with one more column and the one moved column "Material":


 


Regarding the material, the material assigned to a body will always have priority over the material assigned to the part.

Example :

The material assigned to the part is different from that assigned to a sheet metal body, each associated material is displayed on the bodies.


 


When a configuration is created in a document it is possible, in the properties of this configuration, to specify which name will be retrieved for the BOM. It is possible to add a column retrieving this information.

 -->