The ISO 13715 standard defines six options for specifying edge tolerances. Therefore, it is possible to enter a numerical value in each of the six input fields.

The deviation from the ideal nominal shape can be defined by specifying a size.

If it is necessary to specify upper and lower limit deviations for the edge size, both values must be provided. The upper limit deviation is placed above the lower limit deviation (see Examples). The specified tolerance limits correspond to the maximum and minimum dimensions, respectively.


  • All fields are optional.


    


  • Each field allows you to enter a decimal or integer value.
  • The value may be preceded by a + or a - sign.

 

See examples of how to use it.