• Improvements and fixes to several utilities:
  • Teeth cutting :
      • BG0210 - Unable to create a wheel with some profiles.


  • Scoreboard :
      • AM0239 - Zeros on the right, possibility to put or not zeros on the right of the values, depending on the selected precision.
      • BG0045 - If "Positioning tolerance" is set to "<None>", this puts "<None>" in the table..
      • BG0046 - If the attachment entity is lost (e.g. angled on the hole), the loss is managed with a messagebox.
  • Excel steering :
      • BG0215 - The utility does not launch from the toolbar.
  • Finishes :
      • AM0064 - In multi-sided assembly, to align the decorations.
  • Setup/Installation :
      • BG0065 - CHM documentation does not open from the toolbar.
  • Drill-hole library :
      • AM0062 - Possibility to bookmark drillings.
      • BG0047 - If "Select existing sketch" is selected, position numbers are not incremented.
      • BG0050 - Message msg43-1 (The "1_" standard is not present in the standard directory specified in the options!) appears on re-edit.
      • BG0051 - Default settings (hole diameter and angle) in hole mode without tapping.
      • BG0052 - On an Assembly in Part edit mode, position mode on the fly. After applying, the positions do not follow.
      • BG0053 - On an Assembly in Part edition mode, we do not retrieve the positions of the existing holes of the part on the 3d.
      • BG0248 - The valeurs in the interface change.
      • BG0286 - In assembly edit mode the hole highlighting does not work.
  • Top view quotation :
      • BG0048 - Dimensioning between two sides with a tolerance, the tolerance disappears after being applied.
      • BG0049 - If the coast is negative, the tolerances disappear.
      • BG0056 - Lhe "Take sign into account" option causes tolerances to be lost.
      • BG0259 - Rounding of dimensions to 10-8   between SOLIDWORKS and the "Top view dimensioning" tool are not correct.