When choosing this mode, it is necessary to select the entities to be processed.


 


The first 3 filters can be combined.

By selecting this filter, it is possible to select vertices and/or sketch points. The results taken into account by the calculations are :

  • If only one entity is selected, the X,Y,Z coordinates will be taken from the origin of the part.


 


  • If 2 entities are selected the results will give the distances X, Y, Z as well as the distance between these 2 entities.


 


  • If several vertices are selected (from 3) the combination cannot give any result and the array will be emptied.


 


By selecting this filter, it is possible to select edges and/or sketch entities.

  • If only one edge is selected the results will give the length of that entity.


 


  • If multiple edges are selected the results will give the sum of the lengths in the ''Total Length'' property as well as the angle determined by the 2 entities.


 

 

  • If several entities are selected in different planes the results will give more information (XYZ distances, distance between planes, ...) in addition to the total length.


 


By selecting this filter, it is possible to select faces and/or surfaces.

  • If only one face is selected the results will give the area of the surface as well as the perimeter formed by its edges. For a cylindrical face the diameter value will also be retrieved.


  

 

 

  • If several faces are selected the results will give the total area. If the selected faces are flat, the angle will also be found.


 


By selecting this filter, it is possible to select a volume body. If the part has several volume bodies and if no body is selected, the tool will put all the values corresponding to the complete part. This list is updated as soon as more bodies are selected. This filter cannot be combined with the other filters (vertex, edge, face).