When you choose this mode, you must select the entities to be processed.


 


The first 3 filters can be combined.

By selecting this filter, it is possible to select vertices and/or sketch points. The results taken into account by the calculations are :

  • If only one entity is selected, the coordinates will be X, Y, Z relative to the part's origin.


 


  • If two entities are selected, the results will show the X, Y, and Z distances, as well as the distance between those two entities.


 


  • If multiple vertices are selected (3 or more), the combination may not yield any results, and the table will be cleared.


 


By selecting this filter, you can select edges and/or sketch entities.

  • If only one edge is selected, the results will show the length of that feature.


 


  • If multiple edges are selected, the results will show the sum of the lengths in the "Total Length" property, as well as the angle defined by the two entities.


 

 

  • If multiple entities are selected across different planes, the results will provide additional information (XYZ distances, distance between planes, etc.) in addition to the total length.


 


By selecting this filter, it is possible to select faces and/or surfaces.

  • If only one face is selected, the results will show the area of the surface as well as the perimeter formed by its edges. For a cylindrical face, the diameter will also be calculated.


  

 

 

  • If multiple faces are selected, the results will show the total area. If the selected faces are flat, the angle will also be calculated.


 


By selecting this filter, it is possible to select a volume body. If the part comprises several bodies and no body is selected, the tool will put all the values corresponding to the complete part. This list is updated as soon as more bodies are selected. This filter cannot be combined with the other filters (vertex, edge, face).