The standard  ISO 13715 allows you to define 6 possibilities for indicating edge tolerances. It is therefore possible to enter a numerical value in the 6 value entry fields.

The deviation from the ideal nominal shape can be defined by specifying a size.

If it is necessary to specify upper and lower limit deviations for the edge size, both values must be indicated. The upper limit deviation is placed above the lower limit deviation (see  Examples). Limit deviations correspond to maximum and minimum dimensions respectively.


  • All zones are optional.


    


  • Each field is used to enter a decimal or integer numerical value.
  • The value can be preceded by a + or - sign.

 

See the  examples of use.